Forum Comments

Instant airspace authorization via LAANC
In Feature requests
Instant airspace authorization via LAANC
In Feature requests
How to pause the mission to insert 2nd battery?
In Questions
3D functionality (auto gimbal tilt)
In Feature requests
Derrick Frohne
May 03, 2021
I fly Mavic Air 2 by the way.
0
3D functionality (auto gimbal tilt)
In Feature requests
Derrick Frohne
May 03, 2021
For the second part, start with polygon functionality and lock camera gimbal along the perimeter to allow for enhanced 3D modeling when I stitch all my photos in WebODM. The polygon function is already implemented within the app and would be faster for your software team to create within beta since not need much command lines. In regards to the third part, it would be similar as second part however, change the vertical altitude/height of the drone therefore it flies at consistent height along the perimeter. Also allow for the gimbal angle to remain fixed at the angle the user/pilot command. For example, I want to fly my drone at 130 feet AGL along the perimeter of polygon from one way point to the next and allow for me to have the camera angle fixed at 80° for until the entire building is flown around. After the drone flies around the perimeter 1 time, allow the pilot/user to give a command to increase or decrease the altitude again in the same mission and allow to change the camera angle. After one pass around the structure at 130 feet AGL at -80°, then next pass I can command to fly the drone at 100 feet AGL around the perimeter with camera angle at -60°. After I pass around the entire structure again, allow me to decrease the drone altitude to 80 feet AGL with camera angle at -45° around the entire perimeter. All these commands will be within the same mission to allow for enhanced 3D modeling of images when stitched in WebODM or other software. I'd like to fly a beta model after the software team implements this idea. I have the Copterus App and downloaded TestFlight. Send me an email invite to fly this beta and I'll test it for your entire team and show the 2D orthomosaic map and 3D model of the images I created with Copterus App and the commands the software team made. Does DJI have stitching software like Drone Deploy, Pix4D, or WebODM? I currently use WebODM since Pix4D and Drone Deploy are expensive.
1
4
Derrick Frohne
More actions